Diferencia entre revisiones de «KiWi/en»

De wiki.kiconex
VisualWikitexto
(Página creada con «|- |Voltaje de alimentación |5 VDC |- |Consumo de potencia |< 5 W |- | colspan="2" |'''Temperatura''' |- |Rango de temperatura |<nowiki>-40ºC a 125ºC</nowiki> |- | colspan="2" |'''Material''' |- |Material |Carcasa de impresa en 3D con PLA |- |Dimensiones |95x30mm |- |Peso |100 g |}»)
(Página creada con «Information about kiWi 2023.»)
 
(No se muestran 4 ediciones intermedias de 2 usuarios)
Línea 1: Línea 1:
= kiWi =
= kiWi =
kiWi (or '''ki''''conex '''wi''''reless) is our solution for transforming controls with modbus RTU communication to modbus TCP/IP communication. This communication allows to connect devices wirelessly to the local ethernet network of the installation where the main '''kiBox''' is located.
kiWi (or '''ki''''conex '''wi''''reless) is our solution for transforming controls with modbus RTU communication to modbus TCP/IP communication. This communication allows to connect devices wirelessly to the local ethernet network of the installation where the main '''kiBox''' is located.
__TOC__
 
Description of the kiWi solution === ===
Information about [[kiWi 2023]].
 
=== Description of the kiWi solution ===
In a conventional facility with Modbus RTU communication, all devices have to be wired directly to the Modbus master (''kiBox'') using a 2-wire shielded cable. This connection is made using daisy-chain connection type. It can be seen in more detail in this
In a conventional facility with Modbus RTU communication, all devices have to be wired directly to the Modbus master (''kiBox'') using a 2-wire shielded cable. This connection is made using daisy-chain connection type. It can be seen in more detail in this


Línea 10: Línea 12:
Example of an installation via Modbus RTU using the ''KiWi:'''
Example of an installation via Modbus RTU using the ''KiWi:'''
[[Archivo:SP - ESQUEMA CONEXIONES KIWI.jpg|centro|miniaturadeimagen|800x800px|kiWi wiring diagram]]
[[Archivo:SP - ESQUEMA CONEXIONES KIWI.jpg|centro|miniaturadeimagen|800x800px|kiWi wiring diagram]]
It should be noted that in a ''kiWi'' up to a maximum of two equipments can be connected and the conditions that must be met are:
It should be noted that a ''kiWi'' can connect up to a certain maximum number of devices, which will depend on the number of variables available on the devices and the configuration speed of the bus.
 
* Not to exceed 800 parameters between the two devices.
* To be able to work with 9600bps speed.


=== Technical characteristics ===
=== Technical characteristics ===
{| class="wikitable"
{| class="wikitable"
|+
|+
| colspan="2" |'''RED'''''
| colspan="2" |'''RED'''
|-
|-
|WiFi
|WiFi
Línea 28: Línea 27:
|1xETH
|1xETH
|-
|-
|'''Modbus'''' colspan="2" |'''Modbus'''''
|'''Modbus''' colspan="2" |'''Modbus'''
|-
|-
|Modbus Protocols
|Modbus Protocols
Línea 51: Línea 50:
|- 8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB); 32 bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC)
|- 8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB); 32 bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC)
|-
|-
|'''System'''' colspan="2" |'''System''''
|'''System''' colspan="2" |'''System'''
|-
|-
|CPU
|CPU
Línea 64: Línea 63:
|4 MB
|4 MB
|-
|-
|- colspan="2" |-'''Power'''''
|- colspan="2" |-'''Power'''
|-
|-
|Connector
|Connector
Línea 76: Línea 75:
|< 5 W
|< 5 W
|-
|-
|- colspan="2" |'''Temperature''''
|- colspan="2" |'''Temperature'''
|-
|-
|Temperature range
|Temperature range
|- |<nowiki>-40ºC to 125ºC</nowiki>
|- |<nowiki>-40ºC to 125ºC</nowiki>
|-
|-
| colspan="2" |'''Material''''
| colspan="2" |'''Material'''
|-
|-
|Material
|Material
Línea 96: Línea 95:
Default configuration:
Default configuration:


* WiFi: '''KIWI_XXXXXXXXXX'''''
* WiFi: '''KIWI_XXXXXXXXXX'''
* WiFi Password: '''12345678'''''
* WiFi Password: '''123456789'''
* IP configuration portal: '''192.168.4.1''''
* IP configuration portal: '''192.168.4.1'''
* Portal password: '''12345678'''''
* Portal password: '''123456789'''


<span id="Conexión_Puerto_RS485"></span>
==== RS485 Port Connection ====
==== RS485 Port Connection ====


Línea 131: Línea 131:
|}
|}


<span id="Antes_de_empezar"></span>
==== Before you start ====
==== Before you start ====


<span id="Parámetros_de_configuración"></span>
===== Configuration parameters =====
===== Configuration parameters =====


Línea 157: Línea 159:
You can check the version in the information window of the ''KiWi'' web portal.
You can check the version in the information window of the ''KiWi'' web portal.


<span id="Acceso_al_portal_de_configuración_de_KiWi"></span>
==== Access to the ''KiWi'' configuration portal ====
==== Access to the ''KiWi'' configuration portal ====


<span id="Acceso_a_KiWi_no_configurado"></span>
===== Access to ''KiWi'' not configured =====
===== Access to ''KiWi'' not configured =====


Línea 169: Línea 173:
The process of the previous section is repeated, but in this case it is necessary to connect to the same WiFi network that was configured in the ''KiWi'' , and the IP to enter in the browser is the IP that was configured in that kiwi.
The process of the previous section is repeated, but in this case it is necessary to connect to the same WiFi network that was configured in the ''KiWi'' , and the IP to enter in the browser is the IP that was configured in that kiwi.


<span id="Configuración_de_KiWi"></span>
==== ''KiWi'' configuration ====
==== ''KiWi'' configuration ====


<span id="Partes_de_KiWi"></span>
===== Parts of ''KiWi'' =====
===== Parts of ''KiWi'' =====


Línea 177: Línea 183:
# Selection of the connection mode. Possibility of wireless or wired connection.[[Archivo:SP - Opciones de red en configuración del KiWi.png|centro|marco|Network options in KiWi configuration]]
# Selection of the connection mode. Possibility of wireless or wired connection.[[Archivo:SP - Opciones de red en configuración del KiWi.png|centro|marco|Network options in KiWi configuration]]
# Network configuration. Indicate WiFi and password to connect to and indicate the necessary parameters.[[Archivo:SP - Configuración de red en configuración del KiWi.png|centro|marco|Network configuration in KiWi configuration]]
# Network configuration. Indicate WiFi and password to connect to and indicate the necessary parameters.[[Archivo:SP - Configuración de red en configuración del KiWi.png|centro|marco|Network configuration in KiWi configuration]]
# Modbus configuration input. Indicate Modbus RTU communication speed and port for Modbus TCP communication. [[Archivo:SP - Configuración RS-485 en configuración del KiWi.png|centro|marco|RS-485 configuration in the KiWi configuration]].
# Modbus configuration input. Indicate Modbus RTU communication speed and port for Modbus TCP communication. [[Archivo:SP - Configuración RS-485 en configuración del KiWi.png|centro|marco|RS-485 configuration in the KiWi configuration]]
# Confirmation of entered parameters. If you want to change any of them, you can go back. [[Archivo:SP - Confirmación de la configuración RS-485 en configuración del KiWi.png|centro|marco|Confirmation of RS-485 configuration in KiWi configuration]].
# Confirmation of entered parameters. If you want to change any of them, you can go back. [[Archivo:SP - Confirmación de la configuración RS-485 en configuración del KiWi.png|centro|marco|Confirmation of RS-485 configuration in KiWi configuration]]
# End of configuration. [[Archivo:SP - Fin de la configuración en connfiguración del KiWi.png|centro|marco|End of the configuration in KiWi configuration]]
# End of configuration. [[Archivo:SP - Fin de la configuración en connfiguración del KiWi.png|centro|marco|End of the configuration in KiWi configuration]]


Línea 190: Línea 196:
If you need to delete the configuration set in ''KiWi'' , you can do it in two ways:
If you need to delete the configuration set in ''KiWi'' , you can do it in two ways:


# If you have access to the configuration portal, at the end of the information window there is a deletion option: [[Archivo:SP - Proceso de borrado del KiWi.png|centro|marco|KiWi deletion process]].
<div class="mw-translate-fuzzy">
# If you have access to the configuration portal, at the end of the information window there is a deletion option: [[Archivo:SP - Proceso de borrado del KiWi.png|centro|marco|KiWi deletion process]]
# In case you do not have access to the portal, you can delete the configuration manually through the reset button located in the hole on the top cover of the '''KiWi'''. It is necessary to insert a very narrow element and hold down the button for about 10 seconds.
# In case you do not have access to the portal, you can delete the configuration manually through the reset button located in the hole on the top cover of the '''KiWi'''. It is necessary to insert a very narrow element and hold down the button for about 10 seconds.
[[Archivo:SP - Botón de reset del KiWi.jpg|centro|marco|KiWi reset button]]You can download the manual from the following link
[[Archivo:SP - Botón de reset del KiWi.jpg|centro|marco|KiWi reset button]]
</div>

Revisión actual - 18:13 27 ago 2024

kiWi

kiWi (or ki'conex wi'reless) is our solution for transforming controls with modbus RTU communication to modbus TCP/IP communication. This communication allows to connect devices wirelessly to the local ethernet network of the installation where the main kiBox is located.

Information about kiWi 2023.

Description of the kiWi solution

In a conventional facility with Modbus RTU communication, all devices have to be wired directly to the Modbus master (kiBox) using a 2-wire shielded cable. This connection is made using daisy-chain connection type. It can be seen in more detail in this

The KiWi solution allows to transform the modbus RTU communication to a wireless modbus TCP/IP connection. In this way, the local WiFi network of the facility can be used to connect the different control-devices. In addition, since the KiWi device also has an RJ45 port, it can also be connected to the local Ethernet network via Ethernet cable through the RJ45 connector. Example of a conventional installation with Modbus RTU communication:

Simple RS-485 schematic

Example of an installation via Modbus RTU using the KiWi:'

kiWi wiring diagram

It should be noted that a kiWi can connect up to a certain maximum number of devices, which will depend on the number of variables available on the devices and the configuration speed of the bus.

Technical characteristics

(360 MHz)
RED
WiFi
Ethernet


1xETH
Modbus
Modbus Protocols
9600
Data bits 8
Stop bits 1
Parity
Duplex
Supported data formats
System
CPU
RAM 520 KiB
Flash memory 4 MB
Connector
Supply voltage 5 VDC
Power consumption < 5 W
Temperature range
Material
Material
Dimensions 95x30mm
100 g

Configuration of the KiWi

Default configuration:

  • WiFi: KIWI_XXXXXXXXXX
  • WiFi Password: 123456789
  • IP configuration portal: 192.168.4.1
  • Portal password: 123456789

RS485 Port Connection

Parts of KiWi'
Parts of a KiWi
  1. RS485 port
  2. 5V power supply
  3. ON/OFF indicator light
  4. Ethernet port
  5. Reset button
RS485 port
Numbering of terminals on a KiWi
PIN USE
1
2
3 A (+)
4 B (-)

Before you start

Configuration parameters
  • WiFi network SSID
  • WiFi network password
  • Free IP for the kiwi
  • Gateway
  • Netmask
  • DNS1 and DNS2
Operating Notes

KiWi creates its own WiFi network, of type KIWI_58AEB3J2, in the following cases:

  • Not configured
  • Wrong configuration
  • Network disconnected


If you have already configured the KiWi , you can access it by connecting to the same network and typing its IP in the browser.

Versions prior to v1.3.5 only support Modbus RTU 9600 baud 8N1 and Modbus TCP communications through port 502.

You can check the version in the information window of the KiWi web portal.

Access to the KiWi configuration portal

Access to KiWi not configured
  1. Connection to KiWi WiFi network from smartphone.
    Example of kiwi wifi network visualization
  2. If you have not been redirected to the configuration portal you must open Chrome, Firefox or similar browser.
    Browsers
  3. Access the IP 192.168.4.1
Access to KiWi by IP
Access to KiWi already configured

The process of the previous section is repeated, but in this case it is necessary to connect to the same WiFi network that was configured in the KiWi , and the IP to enter in the browser is the IP that was configured in that kiwi.

KiWi configuration

Parts of KiWi
  1. Access by password (at the first access you will be redirected to a portal to enter a secure password)
    Main window of the portal in KiWi configuration
  2. Main window of the portal. Click on Configure KiWi/Change configuration, to start.
    Main window of the portal in KiWi configuration
  3. Selection of the connection mode. Possibility of wireless or wired connection.
    Network options in KiWi configuration
  4. Network configuration. Indicate WiFi and password to connect to and indicate the necessary parameters.
    Network configuration in KiWi configuration
  5. Modbus configuration input. Indicate Modbus RTU communication speed and port for Modbus TCP communication.
    RS-485 configuration in the KiWi configuration
  6. Confirmation of entered parameters. If you want to change any of them, you can go back.
    Confirmation of RS-485 configuration in KiWi configuration
  7. End of configuration.
    End of the configuration in KiWi configuration


If during the life of the KiWi , the network to which it is connected is modified, it will be necessary to reconfigure KiWi for the new parameters that characterize the network.

When KiWi has problems connecting to a network, it continuously retries by keeping its WiFi access point open when accessing to verify its configuration and change it if necessary.

Deletion process

If you need to delete the configuration set in KiWi , you can do it in two ways:

  1. If you have access to the configuration portal, at the end of the information window there is a deletion option:
    KiWi deletion process
  2. In case you do not have access to the portal, you can delete the configuration manually through the reset button located in the hole on the top cover of the KiWi. It is necessary to insert a very narrow element and hold down the button for about 10 seconds.
KiWi reset button
Obtenido de «https://wiki.kiconex.com/index.php?title=KiWi/en&oldid=5877»
Powered by MediaWiki