Diferencia entre revisiones de «CONN kibox1A/en»
De wiki.kiconex
(Página creada con «The connection of a kiBox1A is graphically summarized with the following image. alt=KiBox1A connectivity|miniaturadeimage|KiBox1A connectivity|left] The caption is as follows:») |
Sin resumen de edición |
||
| (No se muestra una edición intermedia del mismo usuario) | |||
| Línea 1: | Línea 1: | ||
==Kibox1A connection== | ==Kibox1A connection== | ||
The connection of a kiBox1A can be summarized in three parts: power supply, internet (via GSM network) and connection to the controller (with the RS485 port). | The connection of a kiBox1A can be summarized in three parts: power supply, internet (via GSM network) and connection to the controller (with the RS485 port). | ||
The connection of a kiBox1A is graphically summarized with the following image. | The connection of a kiBox1A is graphically summarized with the following image. | ||
[[File:Kibox1A connectivity.png|alt=KiBox1A connectivity|miniaturadeimage|KiBox1A connectivity|left | [[File:Kibox1A connectivity.png|alt=KiBox1A connectivity|miniaturadeimage|KiBox1A connectivity|left]] | ||
The caption is as follows: | The caption is as follows: | ||
# GSM coverage antenna connector. | # GSM coverage antenna connector. | ||
# | # 2G/3G/4G coverage indicator. | ||
# Coverage signal indicator: the signal quality can be checked through the LED indicators. If these indicators are off, it means that a SIM card is not detected or there is no coverage for the kiBox1A to work. | # Coverage signal indicator: the signal quality can be checked through the LED indicators. If these indicators are off, it means that a SIM card is not detected or there is no coverage for the kiBox1A to work. | ||
# 9-30Vdc power connector. | # 9-30Vdc power connector. | ||
# RS485 port using ModBus RTU communications protocol. The control must be connected to the kiBox1A using a 2-wire shielded cable, connecting the shield to the GND pin (3). | # RS485 port using ModBus RTU communications protocol. The control must be connected to the kiBox1A using a 2-wire shielded cable, connecting the shield to the GND pin (3). | ||
== More information == | |||
* [[ | If you need more information, you have at your disposal: | ||
* [[MainPage|wiki | |||
* [[kibox2A|kiBox1A wiki]]. You will find kiBox specific information. | |||
* [[MainPage|kiconex wiki]]. This is the generic wiki, which can help you with all the doubts you may have on various topics related to kiconex, its products and its platform. | |||
Revisión actual - 06:13 28 ago 2024
Kibox1A connection
The connection of a kiBox1A can be summarized in three parts: power supply, internet (via GSM network) and connection to the controller (with the RS485 port).
The connection of a kiBox1A is graphically summarized with the following image.
The caption is as follows:
- GSM coverage antenna connector.
- 2G/3G/4G coverage indicator.
- Coverage signal indicator: the signal quality can be checked through the LED indicators. If these indicators are off, it means that a SIM card is not detected or there is no coverage for the kiBox1A to work.
- 9-30Vdc power connector.
- RS485 port using ModBus RTU communications protocol. The control must be connected to the kiBox1A using a 2-wire shielded cable, connecting the shield to the GND pin (3).
More information
If you need more information, you have at your disposal:
- kiBox1A wiki. You will find kiBox specific information.
- kiconex wiki. This is the generic wiki, which can help you with all the doubts you may have on various topics related to kiconex, its products and its platform.
