Diferencia entre revisiones de «QSG kibox1A/en»

De wiki.kiconex
VisualWikitexto
(Página creada con «* Unscrew the screws on the back panel and remove the case.»)
 
Sin resumen de edición
 
(No se muestran 6 ediciones intermedias de otro usuario)
Línea 1: Línea 1:
= KiBox0 Quick Start Guide =
= KiBox1A Quick Start Guide =
The kiBoxes have been designed as plug & play IoT devices, thus facilitating their installation.


In this guide, the user will find simplified information to get their kiBox0 up and running and start working with it.
kiBox have been designed as plug & play IoT devices, thus facilitating their installation.
 
<div class="mw-translate-fuzzy">
In this guide, the user will find simplified information to get their kiBox1A up and running and start working with it.
</div>


== Hardware and dimensions ==
== Hardware and dimensions ==
Línea 22: Línea 25:
[[Archivo:Atornillar panel trasero.png|centro|miniaturadeimagen|397x397px|Atornillar panel trasero]]
[[Archivo:Atornillar panel trasero.png|centro|miniaturadeimagen|397x397px|Atornillar panel trasero]]


<div lang="es" dir="ltr" class="mw-content-ltr">
* Connect the antenna to the connector marked "MOBILE"
* Conecte la antena al conector en el que indica "MOBILE"
</div>


<div lang="es" dir="ltr" class="mw-content-ltr">
[[Archivo:Antena.png|centro|miniaturadeimagen|361x361px|Antena]]
[[Archivo:Antena.png|centro|miniaturadeimagen|361x361px|Antena]]
</div>


<div lang="es" dir="ltr" class="mw-content-ltr">
* On the front panel, connect the 4-pin power connector.
* En el panel frontal, conecte el conector de 4 pines de alimentación.
</div>


<div lang="es" dir="ltr" class="mw-content-ltr">
[[Archivo:Power.png|centro|miniaturadeimagen|362x362px|Power]]
[[Archivo:Power.png|centro|miniaturadeimagen|362x362px|Power]]
</div>


<div lang="es" dir="ltr" class="mw-content-ltr">
* Connect the rs485 connector to the KiBox where indicated by the same name. If you want to know more information about the connection of the cables to this connector, follow this [[CONN kibox1A|link]].
* Conecte el conector microUSB al puerto que indica "USB".
 
</div>
[[Archivo:Conexion rs485.png|centro|miniaturadeimagen|376x376px|RS485 connection]]
* Connect the microUSB connector to the port marked "USB".


<div lang="es" dir="ltr" class="mw-content-ltr">
[[Archivo:MicroUSB.png|centro|miniaturadeimagen|361x361px|microUSB]]
[[Archivo:MicroUSB.png|centro|miniaturadeimagen|361x361px|microUSB]]
</div>




<div lang="es" dir="ltr" class="mw-content-ltr">
[https://youtu.be/t1gki-r3mMA Quick Start Explainer Video]
[https://youtu.be/t1gki-r3mMA Video explicativo de inicio rapido]
</div>


<div lang="es" dir="ltr" class="mw-content-ltr">
With this last step completed, we will connect the other end of the USB to our computer, which in the "Device Manager" will detect the device and install the necessary drivers.  
Con este ultimo paso realizado, conectaremos el otro extremo del USB a nuestro ordenador, el cual en el "Administrador de dispositivos" detectara el dispositivo e instalara los drivers necesarios.
</div>


<div lang="es" dir="ltr" class="mw-content-ltr">
The next step would be to enter the IP "192.168.2.1" to enter the KiBox1A configuration
El siguiente paso seria introducir la ip "192.168.2.1" para entrar a la configuración del KiBox1A
</div>

Revisión actual - 04:26 28 ago 2024

KiBox1A Quick Start Guide

kiBox have been designed as plug & play IoT devices, thus facilitating their installation.

In this guide, the user will find simplified information to get their kiBox1A up and running and start working with it.

Hardware and dimensions

In this link you have the product specifications.

Hardware Installation

Follow the following steps to start up the KiBox1A:

  • Unscrew the screws on the back panel and remove the case.
Desatornillar panel trasero
  • Once the back panel is removed, we will see the SIM card holder, which we will insert into it.
Insertar SIM
  • We screw the back panel again to continue with the installation.
Atornillar panel trasero
  • Connect the antenna to the connector marked "MOBILE"
Antena
  • On the front panel, connect the 4-pin power connector.
Power
  • Connect the rs485 connector to the KiBox where indicated by the same name. If you want to know more information about the connection of the cables to this connector, follow this link.
RS485 connection
  • Connect the microUSB connector to the port marked "USB".
microUSB


Quick Start Explainer Video

With this last step completed, we will connect the other end of the USB to our computer, which in the "Device Manager" will detect the device and install the necessary drivers.

The next step would be to enter the IP "192.168.2.1" to enter the KiBox1A configuration

Obtenido de «https://wiki.kiconex.com/index.php?title=QSG_kibox1A/en&oldid=5888»
Powered by MediaWiki