Diferencia entre revisiones de «QSG kiBox/en»

De wiki.kiconex
VisualWikitexto
(Página creada con «= KiBox2-4 Quick Start Guide = kiBox have been designed as plug & play IoT devices, thus making their installation easy.»)
Sin resumen de edición
 
(No se muestra una edición intermedia de otro usuario)
Línea 9: Línea 9:
[[Archivo:Kibox4-new-con nombres.png|centro|miniaturadeimagen|Kibox 4 front panel]]
[[Archivo:Kibox4-new-con nombres.png|centro|miniaturadeimagen|Kibox 4 front panel]]


<span id="Instalación_del_hardware"></span>
== Hardware installation ==
== Hardware Installation ==
 
* Before working with kiBox, it is necessary to prepare the installation of the controllers that will be connected to it. The controllers must be connected to each other in cascade (as shown in the image) and directed to the RS485 ports of the kiBox according to the [https://es.wikipedia.org/wiki/Daisy_chain daisy-chain] topology. Use a 3-wire shielded cable.
* Before working with kiBox, it is necessary to prepare the installation of the controllers that will be connected to it. The controllers must be connected to each other in cascade (as shown in the image) and directed to the RS485 ports of the kiBox according to the [https://es.wikipedia.org/wiki/Daisy_chain daisy-chain] topology. Use a 3-wire shielded cable.


Línea 18: Línea 16:


* Connect the RJ45 cable from the Ethernet port on the kiBox2 to the Ethernet LAN port on the router.
* Connect the RJ45 cable from the Ethernet port on the kiBox2 to the Ethernet LAN port on the router.
[[Archivo:Kibox2 v2024 LAN.jpg|centro|miniaturadeimagen|RJ45 cable connected to kibox2]]


Note: RJ45 cable not included, optional to add to your order.
Note: RJ45 cable not included, optional to add to your order.
[[Archivo:QS kibox2 - 3.puertos.png|centro|miniaturadeimagen|RJ45 cable connected from router to kiBox.]]


* Before performing this step, '''for your safety, check that there is no connection of the instruments to the electrical network'''.
* Before performing this step, '''for your safety, check that there is no connection of the instruments to the electrical network'''.


<div lang="es" dir="ltr" class="mw-content-ltr">
To power the ''kiBox'', simply connect the power cable to its input and then to the mains power supply.
# Prepare el cable de alimentación: conecte fase, neutro y tierra (según lo detallado en la parte trasera de su kiBox) al adaptador de corriente de su kiBox (pieza derecha de la imagen).
[[Archivo:Kibox2 conectado a red.png|centro|miniaturadeimagen|Kibox 2 connected to the mains with a mains adapter.]]
# Conecte el adaptador de corriente a su kiBox.
[[Archivo:Adaptador de red kibox v2024.jpg|centro|miniaturadeimagen|Kibox v2024 network adapter]]
# Conecte el otro extremo del adaptador de corriente a su toma de corriente.
* Access our website https://my.kiconex.com, enter your credentials (a [[Newuser|registration]] is required) and click on access.
</div>
 
<div lang="es" dir="ltr" class="mw-content-ltr">
[[Archivo:QS kibox2 - 4.conexión.png|alt=Adaptador de corriente|centro|miniaturadeimagen|Adaptador de corriente: un extremo a la toma de corriente y el otro al kiBox.]]
</div>
 
<div lang="es" dir="ltr" class="mw-content-ltr">
* Presione el botón de encendido del kiBox para empezar.
* Acceda a nuestra página web https://my.kiconex.com, introduzca sus credenciales (es necesario un [[Newuser|registro]] previo) y haga clic en acceder.
</div>


<div lang="es" dir="ltr" class="mw-content-ltr">
[[Archivo:QS kibox2 - 5.login mykiconex.png|centro|miniaturadeimagen|myKiconex access platform.]]
[[Archivo:QS kibox2 - 5.login mykiconex.png|centro|miniaturadeimagen|Plataforma de acceso myKiconex.]]
</div>


<div lang="es" dir="ltr" class="mw-content-ltr">
* To continue setting up your installation, go to [[User Profile]] or [[Facilities|Facilities]]. We recommend reading the other related sections in [[MainPage|MyKICONEX]].
* Para continuar con la configuración de su instalación, acceda a [[Perfil de usuario]] o [[Facilities|Instalaciones]]. Recomendamos la lectura de los demás apartados relacionados en [[MainPage|MyKICONEX]].
</div>

Revisión actual - 00:01 28 ago 2024

KiBox2-4 Quick Start Guide

kiBox have been designed as plug & play IoT devices, thus making their installation easy.

In this guide, the user will find simplified information to get their kiBox2-4 up and running and start working with it.

Hardware and dimensions

Kibox 4 and kibox 2
kibox2 y kibox4 measurements
Kibox 4 front panel

Hardware installation

  • Before working with kiBox, it is necessary to prepare the installation of the controllers that will be connected to it. The controllers must be connected to each other in cascade (as shown in the image) and directed to the RS485 ports of the kiBox according to the daisy-chain topology. Use a 3-wire shielded cable.
Note: Do not make derivations or close the circuit.
Controls connected in daisy-chain to each other.
  • Connect the RJ45 cable from the Ethernet port on the kiBox2 to the Ethernet LAN port on the router.
RJ45 cable connected to kibox2

Note: RJ45 cable not included, optional to add to your order.

  • Before performing this step, for your safety, check that there is no connection of the instruments to the electrical network.

To power the kiBox, simply connect the power cable to its input and then to the mains power supply.

Kibox 2 connected to the mains with a mains adapter.
Kibox v2024 network adapter
myKiconex access platform.
Obtenido de «https://wiki.kiconex.com/index.php?title=QSG_kiBox/en&oldid=5884»
Powered by MediaWiki