Diferencia entre revisiones de «QSG kibox1A/en»
De wiki.kiconex
(Página creada con «== Hardware and dimensions == In this [https://wiki.kiconex.com/index.php?title=TSP_kibox1A link] you have the product specifications.») |
(Página creada con «centro|miniaturadeimagen|397x397px|Atornillar panel trasero») |
||
| Línea 30: | Línea 30: | ||
[[Archivo:Power.png|centro|miniaturadeimagen|362x362px|Power]] | [[Archivo:Power.png|centro|miniaturadeimagen|362x362px|Power]] | ||
* Connect the microUSB connector to the port marked "USB". | |||
* | |||
[[Archivo:MicroUSB.png|centro|miniaturadeimagen|361x361px|microUSB]] | [[Archivo:MicroUSB.png|centro|miniaturadeimagen|361x361px|microUSB]] | ||
[https://youtu.be/t1gki-r3mMA Quick Start Explainer Video] | |||
[https://youtu.be/t1gki-r3mMA Video | |||
With this last step completed, we will connect the other end of the USB to our computer, which in the "Device Manager" will detect the device and install the necessary drivers. | |||
<div lang="es" dir="ltr" class="mw-content-ltr"> | <div lang="es" dir="ltr" class="mw-content-ltr"> | ||
El siguiente paso seria introducir la ip "192.168.2.1" para entrar a la configuración del KiBox1A | El siguiente paso seria introducir la ip "192.168.2.1" para entrar a la configuración del KiBox1A | ||
</div> | </div> | ||
Revisión del 15:53 27 may 2024
KiBox0 Quick Start Guide
The kiBoxes have been designed as plug & play IoT devices, thus facilitating their installation.
In this guide, the user will find simplified information to get their kiBox0 up and running and start working with it.
Hardware and dimensions
In this link you have the product specifications.
Hardware Installation
Follow the following steps to start up the KiBox1A:
- Unscrew the screws on the back panel and remove the case.
- Once the back panel is removed, we will see the SIM card holder, which we will insert into it.
- We screw the back panel again to continue with the installation.
- Connect the antenna to the connector marked "MOBILE"
- On the front panel, connect the 4-pin power connector.
- Connect the microUSB connector to the port marked "USB".
With this last step completed, we will connect the other end of the USB to our computer, which in the "Device Manager" will detect the device and install the necessary drivers.
El siguiente paso seria introducir la ip "192.168.2.1" para entrar a la configuración del KiBox1A
