Diferencia entre revisiones de «QSG kibox1A/en»
De wiki.kiconex
(Página creada con «centro|miniaturadeimagen|397x397px|Atornillar panel trasero») |
(Página creada con «* Connect the microUSB connector to the port marked "USB".») |
||
| Línea 39: | Línea 39: | ||
With this last step completed, we will connect the other end of the USB to our computer, which in the "Device Manager" will detect the device and install the necessary drivers. | With this last step completed, we will connect the other end of the USB to our computer, which in the "Device Manager" will detect the device and install the necessary drivers. | ||
The next step would be to enter the IP "192.168.2.1" to enter the KiBox1A configuration | |||
Revisión del 15:54 27 may 2024
KiBox0 Quick Start Guide
The kiBoxes have been designed as plug & play IoT devices, thus facilitating their installation.
In this guide, the user will find simplified information to get their kiBox0 up and running and start working with it.
Hardware and dimensions
In this link you have the product specifications.
Hardware Installation
Follow the following steps to start up the KiBox1A:
- Unscrew the screws on the back panel and remove the case.
- Once the back panel is removed, we will see the SIM card holder, which we will insert into it.
- We screw the back panel again to continue with the installation.
- Connect the antenna to the connector marked "MOBILE"
- On the front panel, connect the 4-pin power connector.
- Connect the microUSB connector to the port marked "USB".
With this last step completed, we will connect the other end of the USB to our computer, which in the "Device Manager" will detect the device and install the necessary drivers.
The next step would be to enter the IP "192.168.2.1" to enter the KiBox1A configuration
