Diferencia entre revisiones de «QSG kibox2A/en»
De wiki.kiconex
(Página creada con «* Finally connect the power cable to the front panel.») |
(Página creada con «After all these steps, connect to the wireless network offered by the KiBox2A and we will enter the IP "192.168.1.1" to access its interface.») |
||
| Línea 43: | Línea 43: | ||
[[Archivo:Conectar a corriente.png|centro|miniaturadeimagen|Conectar a corriente]] | [[Archivo:Conectar a corriente.png|centro|miniaturadeimagen|Conectar a corriente]] | ||
After all these steps, connect to the wireless network offered by the KiBox2A and we will enter the IP "192.168.1.1" to access its interface. | |||
Revisión del 11:24 28 may 2024
KiBox0 Quick Start Guide
The kiBox has been designed as a plug & play IoT device, thus facilitating their installation.
In this guide, the user will find simplified information to get their kiBox0 up and running and start working with it.
Hardware and dimensions
In this link you have the product specifications.
Hardware Installation
Follow the following steps to start up the KiBox2A:
- Locate the SIM adapter kit.
- Press on the button that releases the SIM card holder.
- Take out the SIM card holder.
- Place the SIM in the card holder.
- Reinsert the SIM card holder.
- Connect the main and auxiliary mobile antennas to the connectors labeled "MOBILE."
- Plug the WIFI antennas into the connectors labeled "WIFI".
- Connect the GPS antenna to the connector labeled "GPS"
- Finally connect the power cable to the front panel.
After all these steps, connect to the wireless network offered by the KiBox2A and we will enter the IP "192.168.1.1" to access its interface.
