Router/en

= Optional Router = You can add a 3G router as an accessory in your kiconex order to solve your Internet access problems and which offers the following connectivity options:

• Connection to a WiFi network as a client.
• WiFi network as an access point (AP mode).
• 3G/4G connection with an M2M SIM card.
• LAN port to connect your kiBox.

Router access

To access the router configuration portal, you can connect your computer to the LAN port and type the IP 192.168.0.1:8080 in your web browser.

== Router web portal == When accessing, the router displays the page with a general operating status:

Router status page

In the menu on the left, you have 3 options:

• STATUS: displays a menu with the status of the different router tools
• NETWORK: the options in this menu allow you to change the router's network configuration
• SYSTEM: from here you can change the user password or reboot the router.

In the following sections, you can see how to make a network configuration on the router.

Network configuration

Factory defaults

When you receive a router prepared for use in a kiconex network, the default configuration is:

• Priority use of SIM to connect to internet
• Use of WAN port to get internet, in case no SIM is used or no coverage
• WiFi network with open with the following configuration:
  • SSID: kiconex
  • Password: KiconexWiFi
• LAN network to connect clients via ethernet cable, in the IP range 192.168.0.0
• User access to the web portal:
  • User: kiconex
  • Password: 00#Kiconex

Connecting the router as a client of a WiFi network

The router allows you to connect as a client of a WiFi network to obtain Internet. The procedure is as follows:

• Click on NETWORK>WIRELESS:

  

  WiFi network menu

• Click to 'disable' the existing WiFi network and click on the SCAN option:

Disable WiFi network AP to scan for other nearby WiFi networks

• Click "JOIN NETWORK" on WiFi network you want to connect to:

Scan result for WiFi networks. Select the desired one from Join Network

• Enter the password for the WiFi network and set a name for the network interface to be created:

  

  Password and name for WiFi network to which you connect as a client

  * Confirm the settings by clicking "SAVE & APPLY":

Confirm WiFi settings set

• You will be able to see the new network running from the NETWORK>INTERFACES: menu

  

  Router connected as a client to a WiFi network

Crear una red WiFi

Puede crear una red WiFi siguiendo los siguientes pasos:

• Clic en NETWORK>WIRELESS:

Menú red WiFi

• Clic para habilitar la red WiFi existente y clic en el simbolo de configuración:

Habilitar red WiFi

• Configure el SSID deseado en la sección "GENERAL SETUP":

WiFi SSID

• Establezca el cifrado y la contraseña deseados en la sección "WIRELESS SECURITY":

Contraseña WiFi

• Haga clic en "SAVE & APPLY" para guardar la configuración.

• Haga clic en "SAVE & APPLY" para confirmar la configuración inalámbrica:

Confirmar configuración inalámbrica

Cambiar la configuración de APN móvil

Para cambiar la APN asociada a la SIM de su proveedor móvil, se puede hacer configurando la interfaz correspondiente a la red 3G, MOB1S1A1:

Botón de acceso a la edición de la interfaz de red móbil

Configuración de dirección APN

Cofigurar puerto WAN como LAN

El puerto WAN del router puede ser configurado como un segundo puerto LAN, el proceso es el siguiente:

• Clic en NETWORK>INTERFACES:

• Deshabilitar las opciones WAN y WAN6:

• Aplicar cambio con "Save & apply":

• Clic en editar LAN:

• Añadir "eth1" en el campo "Interface", dentro de la pestaña physical settings:

• Aplicar cambios con "Save & apply":