Translations:QSG kiBox0/8/en

• Before working with kiBox0, it is necessary to prepare the installation of the drivers that will be connected to it. The controls are connected to the kibox via RJ45 cable to the LAN port.

Note: RJ45 cable not included, optional to add to your order.

RJ45 Kibox0 connection

• Insert SIM card into the card holder of your kibox. If the card has been purchased from Kiconex, it will come ready for connection.

Kibox0 SIM card holder

• Attach the antennas to your kibox. We recommend the use of two antennas to improve the quality of the GPRS signal received.

Kibox0 antenna connection

• Connect the power to the kibox. And connect to the electrical network as the last step.

Power connection

• Access our website https://my.kiconex.com, enter your credentials (previous registration is required) and click access.