QSG kiBox

KiBox2-4 Quick Start Guide

kiBox have been designed as plug & play IoT devices, thus making their installation easy.

In this guide, the user will find simplified information to get their kiBox2-4 up and running and start working with it.

Hardware and dimensions

Kibox 4 and kibox 2

kibox2 y kibox4 measurements

Kibox 4 front panel

Hardware Installation

• Before working with kiBox, it is necessary to prepare the installation of the controllers that will be connected to it. The controllers must be connected to each other in cascade (as shown in the image) and directed to the RS485 ports of the kiBox according to the daisy-chain topology. Use a 3-wire shielded cable.

Note: Do not make derivations or close the circuit.

Controls connected in daisy-chain to each other.

• Connect the RJ45 cable from the Ethernet port on the kiBox2 to the Ethernet LAN port on the router.

Note: RJ45 cable not included, optional to add to your order.

RJ45 cable connected from router to kiBox.

• Before performing this step, for your safety, check that there is no connection of the instruments to the electrical network.

1. Prepare el cable de alimentación: conecte fase, neutro y tierra (según lo detallado en la parte trasera de su kiBox) al adaptador de corriente de su kiBox (pieza derecha de la imagen).
2. Conecte el adaptador de corriente a su kiBox.
3. Conecte el otro extremo del adaptador de corriente a su toma de corriente.

Adaptador de corriente: un extremo a la toma de corriente y el otro al kiBox.

• Presione el botón de encendido del kiBox para empezar.
• Acceda a nuestra página web https://my.kiconex.com, introduzca sus credenciales (es necesario un registro previo) y haga clic en acceder.

Plataforma de acceso myKiconex.

• Para continuar con la configuración de su instalación, acceda a Perfil de usuario o Instalaciones. Recomendamos la lectura de los demás apartados relacionados en MyKICONEX.