QSG kibox1A

KiBox0 Quick Start Guide

The kiBoxes have been designed as plug & play IoT devices, thus facilitating their installation.

In this guide, the user will find simplified information to get their kiBox0 up and running and start working with it.

Hardware and dimensions

In this link you have the product specifications.

Hardware Installation

Follow the following steps to start up the KiBox1A:

• Unscrew the screws on the back panel and remove the case.

Desatornillar panel trasero

• Once the back panel is removed, we will see the SIM card holder, which we will insert into it.

Insertar SIM

• We screw the back panel again to continue with the installation.

Atornillar panel trasero

• Connect the antenna to the connector marked "MOBILE"

Antena

• On the front panel, connect the 4-pin power connector.

Power

• Connect the microUSB connector to the port marked "USB".

microUSB

Quick Start Explainer Video

With this last step completed, we will connect the other end of the USB to our computer, which in the "Device Manager" will detect the device and install the necessary drivers.

El siguiente paso seria introducir la ip "192.168.2.1" para entrar a la configuración del KiBox1A