Router

<traslate> IMAGEN DEL ROUTER A LA IZQUIERDA

You can add a 3G router as an accesory in your order, to solve all your internet access problems. The Router gives you this connectivity options:

• Connection to a WiFi network as a client
• WiFi in AP mode
• 3G connection with a M2M SIM card
• Two LAN port to connect your kibox and other Modbus TCP device, or a switch with multiple devices.

Router access

To access at the router confiugration portal, you can connect your computer on LAN port and type the IP 192.168.0.1:8080 on your web search:

IMAGEN ROUTER-PC

IMAGEN URL NAVEGADOR

These are factory configuration credentials:

username: kiconex password: 00#Kiconex

Router web portal

When you access, the router show the page with a general working status:

IMAGEN 2-OVERVIEW

On the left menu, you have 3 options:

• STATUS: show a menu with status of the different router tools
• NETWORK: the options of this menu allows you to change the router network configuration
• SYSTEM: from here, you can change the user password or reboot the router

On the next sections, you can see how to do a network configuration on the router.

Network configuration

Create a WiFi network

You can create a WiFi network following the newt steps:

• Clic on NETWORK>WIRELESS:

WiFi configuration menu

• Clic to enable the existing WiFi network and clic on the pen simbol to configure:

Enable WiFi network

• Set the desired SSID on the GENERAL SETUP section:

WiFi SSID

• Set the desired encryption and password on the WIRELESS SECURITY section:

WiFi Password

• Clic on SAVE AND APPLY to save the configuration:

Save WiFi configuration

• Clic on SAVE AND APPLY to confirm your wireless setup:

Confirm wireless setup

Change mobile APN configuration

</traslate>