Translations:Facilities/43/en

De wiki.kiconex
  • Function:
    • Disabled: port with no use.
    • Modbus RTU - Master: port with a standard use for monitoring controls under Modbus RTU protocol.
    • Modbus RTU - Bridge: port used to serve information to another monitoring system external to kiConex. A port configured in this way makes the kiBox act as a Modbus RTU slave, serving the information of all the controls connected to those ports configured in MASTER mode.
  • Speed (bps): Modbus communication speed in bps. Supported: 300, 1200, 2400, 4800, 9600, 19200, 38400, 57600 and 115200.
  • Data bits: data bits of the transmission. It must match the configuration of the connected controls. It can have the value 7 or 8.
  • Parity: the parity bits allow the frame receiver control to determine if the received message is corrupted. This data must also be set to match the value configured by the control. The possibilities are: none, odd and even.
  • Stop bits: the value can be 1 or 2. This value, like the previous parameters, must be set according to the configuration of the controls to be connected to the bus.
Configuration of a kiBox RS485 port, to operate in master mode with 9600bps speed, 8 data bits, no parity and with 1 stop bit
Configuration of a kiBox RS485 port, to operate in master mode with 9600bps speed, 8 data bits, no parity and with 1 stop bit