Translations:System/9/en

De wiki.kiconex
Revisión del 12:36 30 abr 2024 de Ivillasmil (discusión | contribs.) (Página creada con «=== Hardware information === # '''Hardware model'''': Indicates the model of internal electronic board that the ''kiBox'' has. # '''Commercial model'''': Indicates the commercial model of the ''kiBox''. # '''Number of ports'''': Indicates the number of RS485 ports the ''kiBox'' has. # '''Activity time'''': Indicates the time the ''kiBox'' has been active while running the software. This time is reset if the equipment is restarted by turning the power off and on again.…»)
(difs.) ← Revisión anterior | Revisión actual (difs.) | Revisión siguiente → (difs.)

Hardware information

  1. Hardware model': Indicates the model of internal electronic board that the kiBox has.
  2. Commercial model': Indicates the commercial model of the kiBox.
  3. Number of ports': Indicates the number of RS485 ports the kiBox has.
  4. Activity time': Indicates the time the kiBox has been active while running the software. This time is reset if the equipment is restarted by turning the power off and on again.
  5. Temperature: Indicates the internal temperature of the kiBox electronic board.
  6. Free RAM memory: Indicates the free RAM memory.
  7. Free HDD: Indicates the free space on the HDD hard disk.
  8. Network interface': Indicates the information of the network interfaces to which the kiBox is connected. There are eth0, eth0 and tun0, in each of them the obtained IP and the MAC address are indicated except in tun0 in which the MAC is not shown.
Ex. Hardware information
Obtenido de «https://wiki.kiconex.com/index.php?title=Translations:System/9/en&oldid=4246»
Powered by MediaWiki