Translations:KiParameters/124/en

De wiki.kiconex
Revisión del 07:28 7 may 2024 de Bruiz (discusión | contribs.) (Página creada con «* If you select "'''''RTU'''''", choose the serial port (check which one is correct in Windows “Device Manager”), the Modbus address of the control, the speed, the message size , the type of parity and the number of stop bits. * If you select "'''''TCP'''''", include the IP address and port. <gallery widths="400" heights="300" perrow="2" caption="Setting up a device readout using Modbus RTU (left) or TCP (right)."> File:KiParameters - Leer Local RTU.png File:KiPar…»)
(difs.) ← Revisión anterior | Revisión actual (difs.) | Revisión siguiente → (difs.)
  • If you select "RTU", choose the serial port (check which one is correct in Windows “Device Manager”), the Modbus address of the control, the speed, the message size , the type of parity and the number of stop bits.
  • If you select "TCP", include the IP address and port.
  • Setting up a device readout using Modbus RTU (left) or TCP (right).

Continue selecting a library from those you have downloaded. (to download a library, see the section Libraries and click on “ Read device ”.

Obtenido de «https://wiki.kiconex.com/index.php?title=Translations:KiParameters/124/en&oldid=4269»
Powered by MediaWiki