Translations:KiParameters/133/en

De wiki.kiconex
Revisión del 08:45 7 may 2024 de Bruiz (discusión | contribs.) (Página creada con «As in the map reading functionality, select the Modbus mode in which you want to perform the reading (Modbus RTU or Modbus TCP). You will need to fill out the communication settings to continue: # If you select RTU, choose the serial port (check which one is correct in Windows “Device Manager”), the Modbus address of the control, the speed, the message size, the parity type and the number of stop bits .File:KiParameters - Escribir local RTU.png|alt=Write Local P…»)
(difs.) ← Revisión anterior | Revisión actual (difs.) | Revisión siguiente → (difs.)

As in the map reading functionality, select the Modbus mode in which you want to perform the reading (Modbus RTU or Modbus TCP). You will need to fill out the communication settings to continue:

  1. If you select RTU, choose the serial port (check which one is correct in Windows “Device Manager”), the Modbus address of the control, the speed, the message size, the parity type and the number of stop bits .
    Write Local Popup, Modbus RTU
    Configuring a device write using Modbus RTU.
  2. If you select TCP, include the IP address and port.

In both cases, you will have the possibility to send all parameters or only those to which changes have been made (cells in green).