Translations:CONN kiBox/8/en

ATTENTION: For your safety, work with the circuit breaker down, that is, with the electrical panel without voltage.

1.- Modbus port connections

The RS485 bus connections (modbus) are made directly on the terminals as indicated on the terminal block labels.

Bornero kibox4

2.- Network-internet connection

To connect the kiBox to the internet, it must be connected using an RJ45 cable to the connector located at the bottom left. The kiBox connects to the internet using a dynamic IP (DHCP). This link indicates how to access the kiAdmin to be able to modify its network configuration and set a static IP.

RJ45 cable connected to kibox2

3.- Power connection

To power the kibox, a 3-wire shielded cable is required.