Translations:KiAdmin/10/en

Network Settings

'The kiBox are preconfigured in DHCP mode, so that your network server will be able to assign it an IP address automatically in the range it has available. If you want to assign a static IP, you must follow the following steps:

1. Click on the network eth0

   

   imagethumbnail

2. Next, click on the IPv4 Address. Initially the kiBox will be configured for dynamic IP assignment (DHCP).

   

   image thumbnail

3. In the pop-up that appears, change Automatic to Manual, press the "+" and add the desired IP address, as in the following image:[ [File:ES kiAdmin eth0 IPv4 Static.png|center|imagethumbnail|550x550px|Example of static IP address configuration.]]

NOTE: It is recommended not to modify the IP address 100.100.100.100 so as not to lose the possibility of accessing it again in the future.