Translations:KiParameters/133/en
De wiki.kiconex
As in the map reading functionality, select the Modbus mode in which you want to perform the reading (Modbus RTU or Modbus TCP). You will need to fill out the communication settings to continue:
- If you select RTU, choose the serial port (check which one is correct in Windows “Device Manager”), the Modbus address of the control, the speed, the message size, the parity type and the number of stop bits .
Configuring a device write using Modbus RTU. - If you select TCP, include the IP address and port.
In both cases, you will have the possibility to send all parameters or only those to which changes have been made (cells in green).
