Translations:MAN kiBox0/15/en

Right click on the kibox (Ethernet X) and select "Properties".

Edit the internet properties of kibox0.

The following window appears. Select the fourth line "Internet Protocol Version 4 (TCP/IPv4)" and click on "Properties".

Configuring the internet properties of kibox 0.

Enter the following data. As a note, the last digits of the "IP address" line can vary from 0 to 255. It is recommended to put a number between the range 100 and 150 to avoid conflicts.

Configuring the internet properties of kibox0.

Once filled in as shown in the image, click on "OK". Close the following window. The IP is now configured to access the kibox and log in.